Directions of Use
Technical Specifications
Resources
Product reviews
Shipping & Return
Crop Monitoring
Effective control depends upon regular monitoring of crops. Check crops regularly (every 3 – 5 days) during the season.Application on Cotton
Air: Apply by air spray when there is a reliable cross wind to assist with good penetration into the crop canopy. Application should be carried out in the cooler parts of the day or night. Preferably use aircraft fitted with micron air atomisersGround: use inter-row droppers fitted with nozzles spraying towards the cotton rows. Inter-row nozzles should be level with or just below the canopy and spraying at right angles to the ground.
Mixing
Measure the required amount of KILL-A-MITE, add to the partly filled spray tank, and then add the remainder of the water. If oil is recommended, add this after the KILL-A-MITE is well mixed.Wetting agent is not required.
Mixing Instructions for Apple & Pear Application
Water | Kill-A-Mite | Summer Oil |
1000L/ha (Minimum) | 75ml | 500ml |
1500L/ha (Minimum) | 50ml | 335ml |
2000L/ha (Minimum) | 37.5ml | 250ml |
2500L/ha (Minimum) | 30ml | 200ml |
Dilution Rate (Assorted Crops)
Weak: 0.5ml/LStrong: 1ml/L
This is a general rule of thumb when product label is not applicable. Always follow labels directions before going by this dilution rate.
Compatibility
KILL-A-MITE is compatible with most used insecticides and fungicides. Do not apply with ULV formulations.GROUP 6A INSECTICIDE
Active constituent: 18g/L ABAMECTINSolvent: 481g/L LIQUID HYDROCARBON
Co-Solvent: 100g/L N-METHYL-2-PYRROLIDONE
Safety Directions
Poisonous if absorbed by skin contact or swallowed. Will damage eyes. Will irritate the skin.Avoid contact with eyes and skin. Do not inhale spray mist.
When opening the container, preparing Spray, and using prepared spray, wear cotton overalls buttoned to the neck and wrist and a washable hat, elbow length PVC gloves and goggles.
For space applications, wear cotton overalls buttoned to the neck and wrist and a washable hat, elbow length PVC gloves, goggles and half facepiece respirator with dust cartridge or canister.
If product in eyes, wash it out immediately with water. After use and before eating, drinking, or smoking, wash hands, arms, and face thoroughly with soap and water. After each day's use, wash gloves, goggles, contaminated clothing, and respirator (and if rubber, wash with detergent and warm water).
First Aid
If poisoning occurs, contact a doctor or Poisons Information Centre (Phone Australia 13 11 26).If swallowed, do NOT induce vomiting. Give a glass of water. If skin contact occurs, remove contaminated clothing and wash skin thoroughly. If in eyes wash out immediately with water.
Conditions of Sale
Nulife Technologies Pty Ltd accepts no responsibility for the consistent quality of the product, however since the use and application of the product is beyond control, the company accepts no responsibility whatsoever for any loss, damage or other result following the use of the product whether used in accordance with directions or not; other than those mandatorily imposed by statutes, the liability is limited to the replacement of the goods and is conditional upon a claim made in writing and, where necessary, a sufficient part of the goods being returned for proper examination by the company within thirty days of sale.Insecticide Resistance Warning
Insecticide resistance management KILL-A-MITE is a Group 6A insecticide. Some naturally occurring insect biotypes resistant to KILL-A-MITE and other Group 6A insecticides may exist through normal genetic variability in any insect population. The resistant individuals can eventually dominate the insect population if KILL-A-MITE or Group 6A insecticides are used repeatedly. The effectiveness of KILL-A-MITE on resistant individuals could be significantly reduced. Since occurrence of resistant individuals is difficult to detect prior to use Sevroc accepts no liability for any losses that may result from the failure of KILL-A-MITE to control resistant insects. KILL-A-MITE may be subject to specific resistant management strategies.Therefore, KILL-A-MITE should not be applied more than the following number of times per season/crop and should not be used consecutively except where a two-spray schedule is specifically recommended.
POISON
KEEP OUT OF REACH OF CHILDREN
READ SAFETY DIRECTIONS BEFORE OPENING OR USING
Shipping cost is based on weight. Just add products to your cart and use the Shipping Calculator to see the shipping price. We want you to be 100% satisfied with your purchase. Items can be returned or exchanged within 30 days of delivery.