1.2 x 1.2 x 2.0 HPS Grow Tent Starter Kit - Legana Plants Plus
1.2 x 1.2 x 2.0 HPS Grow Tent Starter Kit - Legana Plants Plus
1.2 x 1.2 x 2.0 HPS Grow Tent Starter Kit - Legana Plants Plus

1.2 x 1.2 x 2.0 HPS Grow Tent Starter Kit

$800.00
Size: 600W
600W
Colour: 2000K
2000K
Ask a question Share

Product Information

The "1.2 x 1.2 x 2.0 HPS Grow Tent Starter Kit" includes the following components:

  • 1x 1.2 x 1.2 x 2.0 m Seahawk Tent: This is a grow tent with dimensions of 1.2 meters by 1.2 meters and a height of 2.0 meters. It provides an enclosed space for indoor gardening, allowing you to control the environment for optimal plant growth.
  • 1x Hortivision 600W HPS Kit:The Hortivision 600W HPS (High-Pressure Sodium) Kit consists of a 600-watt HPS bulb, a ballast, and a reflector. The HPS bulb emits intense light in the yellow and red spectrum, which is ideal for the flowering stage of plant growth.
  • 1x Cultiv8 Mechanical Timer: The Cultiv8 Mechanical Timer is a device used to control the on/off cycles of electrical equipment. With this timer, you can set specific time intervals for your lighting system or other electrical devices, ensuring they turn on and off automatically according to your desired schedule.
  • 2x Cultiv8 Rope Ratchet: Rope Ratchets are a useful tool for hanging and adjusting the height of your grow light or other equipment. It provides a secure and adjustable suspension system, allowing you to easily raise or lower the position of your lights within the grow tent.
  • 1x Can-Fan RK 100: The Can-Fan RK 100 is a fan designed for ventilation in grow tents. It helps to circulate air and maintain proper airflow within the tent, which is crucial for controlling temperature and humidity levels.
  • 1x 100mm Seahawk Ducting: Seahawk Ducting is used to connect the ventilation system components. It ensures proper airflow from the fan to the outside environment, helping to remove stale air and maintain a fresh and ventilated grow space.
  • 1x Can-Lite GT 300: The Can-Lite GT 300 is a carbon filter that helps eliminate odors and purify the air in your grow tent. It effectively removes unwanted smells and ensures the air leaving the tent is clean and odor-free.
  • 1x 100mm Can-Fan Plastic Flange: The Can-Fan Plastic Flange is used to connect the ducting to the fan and secure the connection. It provides a tight seal and prevents air leakage.
  • 3x 100mm Duct Clamp: Duct Clamps are used to secure and tighten the ducting connections, ensuring a reliable and airtight setup.

This grow tent kit provides you with a comprehensive package to create a controlled indoor growing environment. It includes the essential components for lighting, ventilation, and odor control. With the tent, HPS lighting, timer, rope ratchets, fan, ducting, carbon filter, flange, and clamps, you can set up a budget-friendly system to support healthy plant growth and maintain an optimal growing environment.

Directions of Use

Set Up Instructions:

  1. Open the box and check that you have all the items listed in the kit.

  2. Follow the provided instructions to assemble the Seahawk Tent (1.2 x 1.2 x 2.0 m). Make sure the frame is secure and the tent fabric is properly attached.

  3. Inside the tent, install the Hortivision 600W HPS Kit. Connect the reflector to the ballast and attach the HPS bulb to the reflector following the manufacturer's instructions.

  4. Hang the Hortivision 600W HPS Kit using the Cultiv8 Rope Ratchets. Attach the ratchets to the tent frame or a sturdy support structure, and use them to suspend the lights at an appropriate height above your plants.

  5. Attach the 100mm Can-Fan Plastic Flange to the Can-Lite GT 300 Carbon Filter. Make sure it is securely connected.

  6. Hang the Can-Lite GT 300 Carbon Filter inside the tent using the Cultiv8 Rope Ratchets. Attach the ratchets to a sturdy support structure and position the carbon filter at the correct height to allow air to pass through it.

  7. Connect the exhaust side of the Can-Fan RK 100 to the intake side of the carbon filter. Secure the connection with a Duct Clamp. This setup will pull air through the carbon filter and push it outside of the tent.

  8. Plug the Cultiv8 Mechanical Timer into a power source and adjust the timer settings according to your desired lighting schedule. Connect the Hortivision 600W HPS Kit to the timer so it turns on and off automatically at the scheduled times.

  9. Double-check all connections to ensure they are secure and airtight to prevent leaks.

  10. Turn on the Cultiv8 Mechanical Timer to activate the Hortivision 600W HPS Kit. Adjust the height of the lights using the Cultiv8 Rope Ratchets to maintain an appropriate distance from your plants.

Remember to follow safety precautions and guidelines provided by the manufacturers. Regularly monitor temperature, humidity, and other environmental conditions inside the tent to ensure optimal growth for your plants.


NOTE: The orientation of the Carbon Filter does not matter. The setup instructions provided are based on the most commonly used layout orientation.

Technical Specifications

Contents

1x 1.2 x 1.2 x 2.0 m Seahawk Tent
1x Hortivision 600W HPS Kit
1x Cultiv8 Mechanical Timer
2x Cultiv8 Rope Ratchet
1x Can-Fan RK 100
1x Seahawk 100mm Ducting
1x Can-Lite GT 300
1x Can-Fan Plastic Flange 100mm
3x Duct Clamp 100mm

Product reviews
Shipping & Return
Shipping cost is based on weight. Just add products to your cart and use the Shipping Calculator to see the shipping price.

We want you to be 100% satisfied with your purchase. Items can be returned or exchanged within 30 days of delivery.